Facade Coating

Extreme beading behaviour for ultimate weather protection

proPERLA® Facade Coating is a unique treatment technology. It creates self cleaning and super hydrophobic facades, without affecting its breathability.

Proven performance

Coatings incorporating silane resin technology have been available for over 25 years and are actually the fastest growing exterior coating systems in Europe. All this expertise has been combined with the latest technology. And the result is impressive!

Reduces rain penetration
Extremely water repellent
Improves thermal efficiency
Will allow the building to breathe
Self-cleaning like a lotus leaf
15-20 year lifespan
Can be used directly on most masonry substrates

Water repellent

You will recognise the excellent water repellent properties by its beading behavior. It will make the masonry dry and extremely resistant to biological hazards, mould, mildew,etc. A dry masonry will improve the thermal resistance, prevent frost damage and reduce the growth of microbial spores.

Breathability

The masonry is able to breathe and will be permeable to water vapour. Air and moisture pass through from one side to the other. A breathing masonry will improve the thermal conductivity and insulation properties. Just a 5% content of damp in cavity wall insulation or other building materials can lower the thermal resistance by up to 50%.

Self cleaning

Dirt particles are unable to obtain a hold on the proPERLA® coated facade and will simply flow off with rainfall. The façade remains clean and attractive, even on sides which are particularly exposed to the weather like on the north-facing side or facades in shade, as well as in areas with high air humidity or sea salt penetrated air.

Colour stability = Durability

Your coated masonry will be protected against the destructive impact of adverse weather conditions (sun, acid rain, salt spray, smog etc). It will be weather protected and colour stable for many years.

Colour selection

For problems with the surface absorption see our primer.

proPERLA® Primer

proPERLA® Primer is a special water-based primer for proPERLA® Facade Coatings with solidifying effect and high penetration depth. It is diffusively and adherent and only suitable for porous surfaces.

Recommended for:
Equalizing priming coats for mineral surfaces such as lime, cement, plaster, limestone, concrete, lightweight concrete, brick, plasterboard, etc. An application can also be done in poorly ventilated spaces, inclusively where food is stored.